Big Red - 1-Watt Red w/ 8X Beam Expander

Custom High Power Handheld Laser Pointer Kit
 
This listing is for one custom handheld laser pointer kit. The kit is fully modular and easy to assemble and disassemble. No special tools or soldering required to assemble this pointer kit. This is NOT A TOY and should be treated with respect. Never aim the beam at any living creature, aircraft, another person's property or anything you shouldn't! Buyer assumes all responsibility for the operation and ownership of this device.
 
 
Features Include:
Rigid Aluminum Host - Black w/ Red Carbon Fiber Handgrip
2x - 8x Beam Expander w/ Custom 3D Printed Adapter
Ushio 1W-HL63283HD Laser Diode in 12mm Copper Module
5 Mode Driver (High, Med, Low, Strobe, SOS)
Custom Focus Knob w/ AR Coated Glass Lens & Tension Spring
Forward-Clicky Latching Tail Switch - Main Power
22 AWG Silicone Jacketed Internal Wiring
Contact Me With Any Questions
 
* This is a very powerful pointer and you must never shine it at another person, animal, aircraft or another person's property. This is NOT a toy! You are solely responsible for its use.  always wear protective eye-wear that is rated to block the wavelength selected and NEVER look directly at the beam. You only have one set of eyes!
 
* Some simple assembly required. This is a kit and must be put together to be made functional. No tools or soldering required. Please ask if you have ANY questions!
 
* Can be used with or without the Beam Expander or adapter attached. Must be careful not to cross-thread or over-tighten the adapter when installing.
 
* The primary lens should be focused as best as possible before adding the beam expander. The adapter should be installed before inserting the beam expander. The adapter should screw down rather tightly so please make sure it's not cross threaded.  Be sure to hold onto the adapter itself when installing the beam expander so as not to put unnecessary pressure on the threads. A couple of wraps of plumbers tape may help protect and tighten the threads of the adapter.
 
* Requires 2x 18650 High Drain Lithium Batteries(not included). May be purchased online on at most vape stores. The positive (+) side goes towards the front of the pointer. Please be aware that some flat-top batteries will not make contact with each other thus not completing the circuit.
 
* Duty Cycle - 30 Seconds ON / 60 Seconds OFF (High Setting). Do not allow to overheat.
 
* LPM testing done with G-2 Lens (not included). See photos for results.